Meters & Sensor Attachments

Connect meters & sensors to your Wildeye using a range of attachment accessories as shown in the diagram below. 

• Many meters & sensors are available from Wildeye that have pre-fitted plugs.  If you are connecting to an existing meter/sensor, choose between the standard M12 Field Connect or M12 Bare Wire accessories to attach your meter/sensor to the Wildeye cable. 
• Most Standard Wildeye Models have interface cables that contain multiple channels. Use splitter accessories to physically connect multiple meters/sensors to a single Wildeye cable. 
• If extra cable length is required, choose from a range of off-the-shelf waterproof cable extension options. 
• If additional channels are required, add an expander module to any Wildeye cable containing an "S" channel.

Meter & Sensor Attachment Options

Product Code	Image	Description	Application
ACC-CON-M12-5POS-M-3 ACC-CON-M12-5POS-M-6 ACC-CON-M12-5POS-M-8		M12 Field Connect Male, 5-position. Options for cable sizes: 3mm, 6mm, 8mm	Wire any meters/sensor with bare wire ends to this field connect. Choose the correct size for the thickness of the meter/sensor cable. Waterproof if sealed correctly during install.
ACC-CAB-M12-M-5		M12 Bare-Wire Cable: Male M12 5-pos connector on one end and free wires on other.	Wire meters/sensors with terminal block connections to this accessory.  The bare wire end is not waterproof unless sealed correctly.
ACC-CAB-M12-EXT-5P-2M ACC-CAB-M12-EXT-5P-3M ACC-CAB-M12-EXT-5P-5M ACC-CAB-M12-EXT-5P-10M ACC-CAB-M12-EXT-5P-15M ACC-CAB-M12-EXT-5P-30M		5 Pole M12 Male to Female PUR black extension Cable. Options for cable length: 2m, 3m, 5m, 10m, 15, 30m	Waterproof cable extensions to extend the distance between the Wildeye and your meter/sensor.
ACC-CON-M12-2SPLIT		M12 5P Y-Splitter, 1 Male and 2 Female connections, solid shell style.	Use this part to attach 2 different  meters/sensors to a Wildeye cable.
ACC-EXP-2MA ACC-EXP-MV ACC-EXP-MO		Wildeye Single Cable Expander modules with M12 plug cable option. Channels options: "A" (4-20mA), "V" (0-5V), "O" (10k resistance).	Add expanders to connect additional meters/sensors to your Wildeye.  Expanders can have multiple cables and channel types, for details on expander options click here.
ACC-EXP-3LW		Wildeye 3-Cable Expander modules with bare wire cable option. Channels options: "W" (watermark)	Add expanders to connect additional Watermark sensors to your Wildeye.
ACC-CAB-5PCOUNT		5-pin M12 adaptor cable to convert new loggers with counter inputs on Pin 5 to match older sensors with with counter line on Pin 2.	Connecting old 3G pulse-output sensors to new WILD-M loggers
ACC-CAB-5PENV		Same as ACC-CAB-5PCOUNT above, but also contains pass-through on SPO, An, & GND.	Connecting old 3G pulse-output sensors to new WILD-M loggers