Wildeye Solar Bracket - NP & JC Series

The Wildeye NP (USA) & JC (Aus/NZ) Series Solar Bracket is a rugged outdoor solar panel combined with a mounting bracket designed to mount the Wildeye and power it continuously for typical remote sensing applications.  The panel and bracket feature aluminum frames for long-lasting rust-proof operation. The solar bracket comes with a polarized M8 connector to plug directly into your Wildeye power cable: the Wildeye comes with solar recharging capability directly built in.

The NP Series Solar Bracket is typically used to power Wildeyes used in the following applications:

Soil Moisture & Irrigation Monitoring Reservoir and Pond Monitoring Well & Ground water Monitoring Surface water monitoring Flow Monitoring (not including the meter) Tank Level Monitoring Solar Bracket Features Rugged aluminum construction for resistance to corrosion in harsh conditions 45 Degree fixed tilt angle with rugged bracket for maximum lifetime in high wind-load or vibrating environments Built-in mount for the Wildeye External Leaded Antenna Rugged bird spikes to prevent bird roosting and associated panel obstruction Multi-use backing plate with both screw hole mounting and cable tie mounting options

Ordering Options

Part Code	Power
ACC-SOLBRACKET-NP-5W.2 (Sold in USA)	5W
ACC-SOLBRACKET-JC-5W (Sold in Aus & NZ)	5W

Specifications

Parameter	Specification (NP)	Specification (JC)
Cell Type	Monocrystalline	Monocrystalline
Maximum power (Pmax)	5W	5W
Voltage at Pmax (Vmp)	17.37V	17.4V
Current at Pmax (Imp)	0.35A	0.29A
Open-circuit voltage (Voc)	20.04V	21.8V
Short-circuit current (Isc)	0.37A	0.31A
Operating temperature	-40°C to 85°C
Outer Dimensions:
Backing Plate Dimensions:
ACC-SOLBRACKET-NP-5W.2 Loaded with Wildeye and U-Bolt option: